All categories
Knowledge Base
   SpecLink-E
      Frequently Asked Questions
         Contents & Updating
         Setup
         Learning Curve
         Importing & Exporting
         Office Use
         Reports
         Formatting
         Notes to the Specifier
         Links
         Editing
         Checklists
   Linkman-E
      Frequently Asked Questions
   Costlink A/E
      Frequently Asked Questions
   Building Product Manufacturers
      Frequently Asked Questions
   How to Videos
   For Specifiers

Define System Roles

Rate this item
(0 votes)

A System Manager can change the functions that each role can perform.

To define system roles:

Make sure that you have the role of System Manager.

Close any open project.

From the Tools tab, System Manager group, select Define System Roles.

A dialog box opens with the same tabs that are in the SLE ribbon menu, along with a Miscellaneous tab.

As you click on each tab, you will see the groups on the left side of the dialog box.

When you click on a group, the commands in the group are displayed in the right side of the box.

To make a change, select the lowest role that should be able to perform each command.

When all changes have been made, click on Save.

You will see a confirmation box displaying the changes that are about to be made.

Click on Yes to confirm.

You will receive a confirmation that your changes have been saved.

Users must exit and restart the software for those changes to be in effect.

Clicking on Restore Default, followed by Save returns all settings to those set by BSD.

As new functionality is added to the software, you may want to revisit the settings you have chosen.

Leave a comment

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.