BSD SpecLink FEATURED MANUFACTURER
Drywall Solutions for Section 09 2116 - Gypsum Board Assemblies
DensArmor Plus panels feature fiberglass mats on both the front and the back for the best in interior protection from moisture currently available. The moisture resistant fiberglass mats make DensArmor Plus panels the ideal replacement for paper faced greenboard.A revolutionary departure from traditional wallboard, the face of DensArmor Plus panels finishes in a similar manner to paper faced wallboard and offers superior performance in resisting mold.
Only fiberglass mat
DensArmor Plus
interior drywall allows contractors to hang it before the building is
enclosed. Paper faced products are often damaged by wind-driven rain
and moisture during installation. DensArmor Plus stands up to normal weather conditions, which allows for acceleration of schedules and the potential reduction of costly delays. DensArmor Plus offers a 6-month limited exposure warranty that guards against delamination and deterioration when exposed to normal weather conditions during and after installation.
Areas of use include:
- Interiors of exterior walls, where moisture intrusion is most likely.
- When the windows, doors or roof have not been installed, making moisture intrusion inevitable ("pre-rock" conditions).
- Areas likely to be exposed to moisture, where paper faced greenboard may have been specified in the past.
DensArmor Plus is available in 1/2 inch regular, 5/8 inch Type X, and 1/2 inch Type C.
For more information, please visit us at: www.densarmorplus.com
Gypsum Products Technical Hotline: (800) 225-6119
Georgia-Pacific Building Products
133 Peachtree Street, 8th floor
Atlanta, GA 30303
Tel: (404) 652-4000
www.gp.com
Plant Locations: Albany, OR; Eugene, OR; Elk Grove, CA; Beaver Creek, MI; Columbus, OH; Conway, NC; Russellville, SC; Crossett, AR; Lufkin, TX; Taylorsville, MS; Vienna, GA

Deck Sheathing for Sections 075200 - Modified Bituminous Membrane Roofing and 075400 - Thermoplastic Membrane Roofing
Over 20 Years of DensDeck® Roof Boards – Proven Performance
Georgia-Pacific DensDeck products are designed to address four persistent challenges inherent in commercial roofing assemblies: fire resistance, moisture resistance, strength and dimensional stability. DensDeck is a patented fiberglass mat-faced, noncombustible, nonstructural, moisture resistant treated gypsum core panel.
- Treated gypsum core for moisture resistance and sound insulation
- Fire, rot and hail resistant
- Holds up well under normal foot traffic while stiffening and stabilizing roof decks
- Easy to install in all types of roof systems
- Ideal product for direct membrane application
With billions of square feet installed in a complete range of
roofing
systems and climate extremes, DensDeck roof boards have proven their
toughness and versatility.
The unique construction has been shown to withstand delamination,
deterioration, warping and job site damage far more effectively than
paper-faced gypsum board and other conventional roofing products such
as wood
fiberboard and perlite.
DensDeck® Prime combines all the features of standard DensDeck with an enhanced surface treatment. The green surface coating allows uniform spreading of adhesives, which results in a stronger, more consistent bond. For cold mastic and torch applied modified bitumen as well as all fully adhered single-ply systems, DensDeck Prime provides a stronger, more economical installation by reducing the amount of mastic or adhesive, eliminating the field primer and reducing the number of fasteners required to achieve high wind uplift values.
DensDeck® DuraGuard provides a durable low perm, integrated coating with all the features of DensDeck roof board. Additionally, the DuraGuard coating provides an ideal substrate for a wide variety of adhered roofing systems, including self-adhered and hot-mopped membranes. Field primer that is typically used to prepare the substrates for self-adhesive membranes can be eliminated by using DensDeck DuraGuard. Also, DensDeck DuraGuard roof board can be used as a substrate under commercial metal and roof tile applications as a substrate for self-adhesive secondary water barriers.
Many of our products may qualify to contribute to earning LEED® credits, including those relating to recycled and regional materials. Call the Technical Hotline at 1-800-225-6119 for more information and to determine which of our 12 manufacturing plants in the United States and Canada would serve your project.
www.densdeck.com
Georgia-Pacific Gypsum LLC
133 Peachtree Street, N.E.
Atlanta, GA 30303
Tel: (404) 652-4000
Tel: (800) 284-5347
Technical Hotline: (800) 225-6119
Home
Contact
Us Copyright Building Systems Design, Inc. 2011. All rights reserved.
3565 Piedmont Road NE, Two Piedmont Center, Suite 300, Atlanta, GA 30305
404-365-8900 ° 888-BSD-SOFT (273-7638) ° fax 404-365-8912
Revised: March 7, 2011


